HOMEWISE
howto · 5 min

How to Stop and Prevent Window Condensation

Clear the causes of streaming morning windows, understand dew point mechanics, and apply permanent ventilation fixes.

ByHomeWise Technical Editorial· Reviewed byGlazing & Insulation Specialist

Why Window Condensation Forms

Condensation on the inside pane of a window is a direct physical result of surface temperature meeting the dew point.

When warm, humid indoor air (typically containing 10–14 grams of water vapor per cubic meter) contacts window glass chilled by outdoor cold air, the layer of air touching the glass drops below its saturation point. The excess water vapor immediately condenses into liquid droplets.


Three Levels of Action to Eliminate Window Condensation

Level 1: Immediate Daily Routine (Stop Mold Growth)

  1. Wipe with a silicone squeegee and microfiber cloth every morning: Never let condensation pool on timber or uPVC sills where it rots caulk and feeds black mold.
  2. Open window trickle vents: Ensure internal trickle vents are open 24 hours a day to allow air circulation across the glass face.
  3. Keep interior window sills clear: Clutter and closed blinds restrict convective warm air rising from radiators underneath the window.

Level 2: Room Humidity Control (Eliminate Moisture at the Source)

  1. Target 45%–50% indoor relative humidity: Measure with a digital hygrometer. If humidity consistently exceeds 60%, surface condensation on glass is virtually guaranteed when outdoor temperatures drop below 5°C (41°F).
  2. Close kitchen and bathroom doors during use: Prevent boiling steam and shower vapors from migrating into bedrooms.
  3. Use a portable dehumidifier: Running a dehumidifier during cold snaps lowers the indoor dew point below the glass surface temperature.

Level 3: Structural & Glazing Improvements

  1. Upgrade single glazing or old double glazing: Modern Low-E double glazing with warm-edge spacer bars and argon gas filling keeps the internal glass pane 4°C–6°C warmer than standard units.
  2. Fit secondary glazing film: Transparent heat-shrink insulating film creates a sealed thermal insulating air pocket over drafty older windows.
FAQ
What does condensation between double glazing panes mean?

Droplets inside the sealed glass unit indicate that the perimeter seal has failed and the desiccant is saturated. The glass sealed unit must be replaced.

Do anti-condensation window films actually work?

Yes. Heat-shrink secondary film creates an insulating air gap that raises the inner surface temperature above the dew point, noticeably reducing sweating.

Sources
  • · Building Research Establishment (BRE) IP 5/06: Modelling and control of condensation in dwellings
  • · Glass and Glazing Federation (GGF): Condensation Some Causes, Some Consequences, Some Remedies